Our company is a well-known company in China that provides products and services such as Japanese standard angle iron. We have also introduced some related content about equal angle iron before today. Today Let ’s learn "Do you know the size of the angle iron?"
The specifications of the angle iron are expressed by the dimensions of the side length and thickness (chǐ cùn). Shenzhen floor slab wholesale is
also called composite floor, floor slab or steel slab, Wancheng composite slab, profiled steel plate. Floor slab is an important supporting product for steel structure building, mainly divided into open floor slab, closed floor Plate, necked dovetail floor plate, reinforced truss floor plate. It is made of galvanized steel sheet through roll cold bending, and its cross-section is V-shaped, U-shaped, trapezoidal or similar waveforms. It is mainly used as a permanent template and can also be selected for other purposes. Shenzhen angle iron's
cross section is a long strip of steel with two sides perpendicular to each other. The angle steel is divided into equilateral angle steel and unequal angle steel. The two vertical sides have the same length as the equilateral angle steel, and the long and short are unequal angle steel. Its specifications are expressed in millimeters of side width x side width x side thickness. The main uses of angle steel are: mainly used to make frame structures, such as towers for high-voltage power transmission, frames on both sides of the main beams of steel bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc. Small places such as shelves with flowerpots on holiday roads, and air-conditioning and solar racks under windows. Currently (Nowadays) domestic angle iron specifications are 2-20, the number of centimeters of the side length as the number, the same angle iron often has 2-7 different side thickness. The imported angle iron indicates the actual size and thickness of the two sides and indicates the related standards. Generally, those with a side length of 12.5cm or more are large angle irons, those between 12.5cm and 5cm are medium-sized angle irons, and those with sides less than 5cm are small (xǐao xǐng) angle irons. Orders for angles of imports and exports (Exports) are generally based on the specifications required in use, and the steel number is the corresponding carbon steel number. It is also that the angle iron has no specific composition and performance (xìng néng) series except the specification number. The delivery length of the angle iron is divided into fixed-angle and double-angle angle irons. How does the size of the angle iron indicate the domestic fixed-angle choice (xuanze) range (fàn wéi) has 3— 9
M, 6-19m four ranges (fàn wéi). Shenzhen steel plate wholesale
is a flat steel made by pouring molten steel and pressing it after cooling. Steel plates are divided according to thickness, thin steel plates <4 mm (0.2 mm thinnest), thick steel plates 4 to 60 mm, and extra thick steel plates 60 to 115 mm. Steel plates are divided into hot rolled and cold rolled according to rolling. The steel plate is flat and rectangular, which can be directly rolled or cut from a wide steel strip. The steel type of the thick steel plate is substantially the same as that of the thin steel plate. In all aspects of the product, in addition to bridge steel plates, boiler steel plates, automobile manufacturing steel plates, pressure vessel steel plates and multi-layer high pressure vessel steel plates and other varieties are purely thick plates, some types of steel plates such as automobile beam steel plates (2.5 to 10 mm thick), patterns Steel plates (2.5-8 mm thick), stainless steel plates, and heat-resistant steel plates are intersected with thin plates. The length (xuanze) of Japanese-made angle iron ranges from 6-15m.
The specifications of the angle iron are expressed in millimeters of the length, width, and height of the angle iron. If the specifications are equal, the angle irons are equal, and the unequal angles are unequal angle irons. Shenzhen floor slab wholesale is also called composite floor, floor slab or steel slab, Wancheng composite slab, profiled steel plate. Floor slab is an important supporting product for steel structure building, mainly divided into open floor slab, closed floor slab Plate, necked dovetail floor plate, reinforced truss floor plate. It is made of galvanized steel sheet through roll cold bending, and its cross-section is V-shaped, U-shaped, trapezoidal or similar waveforms. It is mainly used as a permanent template and can also be selected for other purposes. The specifications of the angle iron can also be expressed by the model, but the model is the number of centimeters widened. Different models indicate the size of different models, so the size of the angle iron must be aligned in the same size, so that we do not usually In the life (shēng huó), the angle iron is confused. Attention should be paid to the model and type of angle iron when buying. It should be used without deviation.
The above is the entire content of "How do the dimensions of the angle iron (chǐ cùn) indicate the specifications of the angle iron?" Will answer for you in detail (xiáng xì), next time we will introduce the Japanese standard angle iron, so stay tuned (Concern)!